CISCO
400-051
CCIE Collaboration Written
Question: 1
|
Company ABC is planning to migrate from MCS-hosted Cisco
Unified Communications Manager applications to Cisco UC on UCS B-Series
servers. Which statement about installation media support is true for this
migration?
A. The install log can be written to a USB flash drive
that is attached to the UCS server.
B. The answer file that is generated by the Answer File
Generator (platformConfig.xml) can be read from a USB flash drive to perform an
unattended installation on the UCS server.
C. The Cisco Music on Hold USB audio sound card can be
mapped to a virtual USB port on a VMware virtual machine on the UCS server.
D. The answer file that is generated by the Answer File
Generator (platformConfig.xml) can be read from an FLP image that is mounted in
a virtual floppy drive.
E. The Cisco Music on Hold USB audio sound card can be
mapped to a virtual serial port on a VMware virtual machine on the UCS server.
Answer:
D
|
Explanation:
Reference:
http://angryciscoguy.com/jello/cisco-answer-file-generator-to-the-rescue/
Question: 2
|
Which statement about the Cisco UC on UCS TRC and the
third-party server specs-based virtualization support model is true?
A. Both the UC on UCS TRC and the third-party servers
spec-based support models have rule-based approaches.
B. The UC on UCS TRC support model has a rule-based
approach and the third-party servers spec-based support model has a
configuration-based approach.
C. The UC on UCS TRC support model requires a high level
of virtualization experience while the third-party server spec-based support
model requires a low to medium level virtualization experience.
D. VMware vCenter is mandatory for the UC on UCS TRC support
model but it is optional for the third-party server spec-based support model.
E. VMware vCenter is optional for the UC on UCS TRC
support model but it is mandatory for the third-party server spec-based support
model.
Answer:
E
|
Explanation:
Reference:
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements
Question: 3
|
Which definition is included in a Cisco UC on UCS TRC?
A. storage arrays such as those from EMC or NetApp, if
applicable
B. configuration of virtual-to-physical network interface
mapping
C. step-by-step procedures for hardware BIOS, firmware,
drivers, and RAID setup
D. server model and local components (CPU, RAM, adapters,
local storage) at the part number level
E. configuration settings and patch recommendations for
VMware software
Answer:
B
|
Explanation/Explanation:
Reference:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations
Question: 4
|
Which capability is supported by Cisco Discovery Protocol
but not by LLDP-MED?
A. LAN speed and duplex discovery
B. network policy discovery
C. location identification discovery
D. power discovery
E. trust extension
Answer:
E
|
Explanation:
Cisco Discovery Protocol provides an additional
capability not found in LLDP-MED that allows the switch to extend trust to the
phone. In this case, the phone is now trusted to mark the packets received on
the PC port accordingly. This feature can be used to off-load the switch
because now it does not need to police the information being received from the
phone.
Question: 5
|
Which two mechanisms does Cisco EnergyWise use for
neighbor discovery? (Choose two.)
A. multicast
B. LLDP-MED
C. UDP broadcast
D. Cisco Discovery Protocol
E. TCP
Answer:
C, D
|
Explanation:
Reference:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Energy_Management/energywisedg.html?referring_site=smartnavRD#wp555927
Question: 6
|
Which protocol does the Cisco Prime LAN Management
Solution application use to communicate with Cisco EnergyWise domain members?
A. UDP broadcast
B. Cisco Discovery Protocol
C. UDP unicast
D. TCP
E. multicast
Answer:
D
|
Explanation:
Cisco Prime LMS 4.1 uses TCP port 43440.
Question: 7
|
Refer to the exhibit.
Assuming that the administrator has never performed any
manual custom uploads, which two file types can be found when you choose
Software Upgrades, followed by TFTP File Management on the Cisco Unified
Operating System Administration web page? (Choose two.)
A. IP phone configuration files
B. sample music-on-hold audio files
C. Identity Trust List files
D. IP phone license files
E. Mobile Voice Access audio files
F. softkey template files
Answer:
C, E
|
Explanation:
We get option for
Identity Trust list Files and Mobile Voice Access audio files.
Question: 8
|
Which statement describes a disadvantage of using the
Cisco TFTP service to serve IP phone load files?
A. The Cisco TFTP services can run on only one Cisco
Unified Communications Manager server in a cluster.
B. Because TFTP operates on top of UDP, there is a high
risk of corrupted load file delivery at the completion of the TFTP process due
to undetected data loss in the network.
C. If a response is not received in the timeout period,
the TFTP server will not resend the data packet.
D. Packet loss can significantly increase the TFTP
session completion time.
E. Because TFTP operates with an adaptive timeout period,
the time to complete the file transfer is unpredictable.
Answer:
D
|
Explanation:
Voice traffic cannot recapture lost packets. Rather than
retransmitting a lost network connection, the phone resets and attempts to
reconnect its network connection.
Explanation:
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6921_6941_6961/7_1_2/english/admin/guide/6921trb.html#wp1031181
Question: 9
|
Which two statements about using the Load Server option
for IP phone firmware distribution are true? (Choose two.)
A. This option must be enabled on at least two servers in
a Cisco Unified Communications Manager cluster.
B. This option must be enabled on Cisco Unified
Communications Manager service parameters for Cisco TFTP.
C. Phone firmware must be manually copied to any
applicable load servers.
D. The load server will not function if its IP address is
not in the same subnet as the IP phones.
E. This option is only available for newer IP phone
models.
F. This option does not accommodate falling back to Cisco
TFTP on error.
Answer:
C, F
|
Explanation:
Reference:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps6884/white_paper_c11-583891.pdf
Question: 10
|
Which two statements about the Peer Firmware Sharing
option for IP phone firmware distribution are true? (Choose two.)
A. This option uses a parent-child hierarchy in which a
firmware image is downloaded by a parent phone to up to three directly associated
child phones.
B. This option must be enabled on Cisco Unified
Communications Manager service parameters for Cisco TFTP.
C. This option mandates that the parent phone and child
phones be identical, selected phone models.
D. This option allows firmware transfers between phones
in different subnets, as long as the round-trip delay is less than 5
milliseconds.
E. This option uses a parent-child hierarchy that must be
manually defined by the Cisco Unified Communications Manager administrator.
F. This option allows falling back to the TFTP server in
the Cisco Unified Communications Manager cluster.
Answer:
C, F
|
Explanation:
Peer Firmware Sharing works by setting up a parent-child
hierarchy of the phones in which a firmware image is downloaded by the parent
phone to a child phone. The advantage of using Peer Firmware Sharing is that
instead of all phones individually retrieving a software image, they pass the
image along from one phone to another phone on the same subnet.
Advantage of PFS:
• Hierarchy is automatic
• One download per phone model on a subnet
• Uses TCP
• Fails back to TFTP
• Speeds up LAN upgrades
• Reduces TFTP CPU load during upgrade
Question: 11
|
Which two statements about the Cisco UC on UCS
specs-based virtualization support model are true? (Choose two.)
A. It has a configuration-based approach.
B. It has a rule-based approach.
C. It has less hardware flexibility compared to the
third-party server specs-based support model.
D. It has less hardware flexibility compared to the UC on
UCS TRC support model.
E. VMware vCenter is optional with this support model.
Answer:
B, C
|
Explanation:
Reference:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations
Question: 12
|
Which definition is included in a Cisco UC on UCS TRC?
A. required RAID configuration, when the TRC uses
direct-attached storage
B. configuration of virtual-to-physical network interface
mapping
C. step-by-step procedures for hardware BIOS, firmware,
drivers, and RAID setup
D. configuration settings and patch recommendations for
VMware software
E. server model and local components (CPU, RAM, adapters,
local storage) by name only; part numbers are not included because they change
over time
Answer:
B
|
Explanation:
Definition of server model and local components (CPU,
RAM, adapters, local storage) at the orderable part number level.
§ Required RAID configuration (e.g. RAID5, RAID10, etc.)
- including battery backup cache or SuperCap - when the TRC uses DAS storage
§ Guidance on hardware installation and basic setup.
§ Configuration of Virtual-to-physical network interface
mapping is design-dependent and not included in TRC definition.
§ Configuration of adapters (such as Cisco VIC, 3rd-party
CNA / NIC / HBA) is design-dependent and not included in TRC definition.
§ Design, installation and configuration of external
hardware is not included in TRC definition, such as:
§ Network routing and switching (e.g. routers, gateways,
MCUs, ethernet/FC/FCoE switches, Cisco Catalyst/Nexus/MDS, etc.)
§ QoS configuration of route/switch network devices
§ Cisco UCS B-Series chassis and switching components
(e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100)
§ Storage arrays (such as those from EMC, NetApp or other
vendors)
§ Configuration settings, patch recommendations or step
by step procedures for VMware software are not included in TRC definition.
§ Infrastructure solutions such as Vblock from Virtual
Computing Environment may also be leveraged for configuration details not
included in the TRC definition.
Question: 13
|
Which capability is support by LLDP-MED but not by Cisco
Discovery Protocol?
A. LAN speed discovery
B. network policy discovery
C. location identification discovery
D. power discovery
E. trust extension
Answer:
A
|
Explanation:
LLDP-MED supports both LAN speed and duplex discovery.
Cisco Discovery Protocol supports duplex discovery only, but this limited
support is not seen as a problem because if there is a speed mismatch, LLDP-MED
and Cisco Discovery Protocol cannot be exchanged and thus cannot be used to
detect the mismatch.
Question: 14
|
In a Cisco EnergyWise domain, which two terms describe a
Cisco IP phone? (Choose two.)
A. endpoint
B. domain member
C. child domain member
D. EnergyWise agent
E. Cisco power distribution unit
Answer:
A, C
|
Explanation:
Reference:
http://www.cisco.com/en/US/docs/switches/lan/energywise/phase2_5/ios/configuration/guide/one_ent.html
Question: 15
|
Which statement about Cisco EnergyWise domain member
neighbor formation is true?
A. Cisco EnergyWise supports static neighbors, but the
neighbor relationship is only possible if a noncontiguous domain member and a
contiguous domain member have a static neighbor entry pointing to each other.
B. Cisco EnergyWise static neighbors can be formed even
if domain members are not physically contiguous.
C. Static neighbors can be manually defined on Cisco
EnergyWise domain members, but TCP protocols must be used.
D. Static neighbors can be manually defined on Cisco
EnergyWise domain members, but they have a lower priority compared to the
autodiscovered members.
E. Static neighbors can be manually defined on Cisco
EnergyWise domain members and the TCP or UDP protocol can be used.
Answer:
B
|
Explanation:
Reference:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Energy_Management/energywisedg.html?referring_site=smartnavRD#wp554384
Question: 16
|
Refer to the exhibit.
Assuming that the administrator has never performed any
manual custom uploads, which two file types can be found when you choose
Software Upgrades, followed by TFTP File Management on the Cisco Unified
Operating System Administration web page for Cisco Unified Communications
Manager? (Choose two.)
A. IP phone configuration files
B. announcement audio files
C. ringer files
D. IP phone license files
E. sample music-on-hold audio files
F. softkey template files
Answer:
B, C
|
Explanation:
The two file types that we get are Announcement Audio
Files and Ringer Files.
Question: 17
|
Which four attributes are needed to determine the time to
complete a TFTP file transfer process? (Choose four.)
A. file size
B. file type
C. network interface type
D. round-trip time
E. packet loss percentage
F. response timeout
G. network throughput
Answer:
A, D, E, F
|
Explanation:
Four attributes that are needed to determine the time to
complete TFTP file transfer process is:
1. File Size
2. Round-trip time
3. Packet loss percentage
4. Response timeout
Explanation:
Reference:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps6884/white_paper_c11-583891_ps10451_Products_White_Paper.html
No comments:
Post a Comment